Grader Blades

<p>Cat® SMART Grader Blade attachments are for cutting, moving and grading dirt, gravel, sand and virtually any other material used as a base.</p>


Cat® Smart Grader Blades Brochure

Cat® Smart Grader Blade attachments are for cutting, moving and grading dirt, gravel, sand and virtually any other material used as a base. There is an assist feature of the blade that takes the unit beyond Smart. The Smart grader blade brings cross slope to Skid Steer Loader and Compact Track Loader platforms.

Application

Attachment Control Mode (manual) turns the D3 and Smart Grader into a machine that is controlled more intuitively for the job at hand. The left joystick maintains control of the machine drive functions. The right joysticks now operate the attachment.

Attachment Control Mode

The dedicated screen of the Smart Dozer provides the operator with feedback on the orientation of the attachment. The operator will see attachment blade slope as well as angle of the blade.

Angle Indication in Machine Display

With cross slope enabled, the operator selects the desired cross slope of the blade by placing the blade to the desired position. Then the attachment maintains that desired slope during operation, even when the machine slope changes.

Cross Slope Control

Grader Blade attachment is external reference ready.  Cat Grade (GPS and UTS), EW GO!, Total Station.

External Reference Ready

Curved moldboard allows for material to roll and fold, improving capacity and performance. Flowing material will easily find low spots and improve grading and leveling performance.

Curved Moldboard

Wear indicating cutting edges feature 20% more wear material on the ground engaging section of the edge and also indicate when it is time to flip (center section only) or replace the edge.

Wear Indicating Cutting Edges

Dual parabolic mirrors provide full visibility to the front cutting edge allowing the operator to see how much the blade is loading and see out to the corners of the blade.

Dual Parabolic Mirrors

Technology components are centrally located and simply route to their respective harnesses back to this location on the tool. Then, a single harness routes to the control module in the cab or on the tool.

Centrally Located Electronics

The hydraulic valve and ECM (Electronic Control Module) are enclosed and mounted within the frame of the tool, protected from damage.

Protected Hydraulic Valve and ECM

Dual front wheels are mounted on an independent axle and on casters to provide stability in both directions of travel. These wheels are air filled and will provide balance for the blade in both automatic and manual operation.

Independent Front Axle with Dual Wheels

Side wings allow the operator to make the blade wider and carry material similar to box blades.

Side Wings

Standard fixed masts provide great performance for single or dual laser technology configurations as well as supporting 3D technology. Bolt pattern fits Accugrade™ Std. GNSS masts.

Mast Mounting Points

Serrated bolt-on step provides safe ingress and egress from machine cab. Additional weld-on serrated steps on the blade ensure safe receiver adjustment, install, or removal.

Serrated Steps

Tool mounted and sealed from the elements, this holder includes all of the operation manuals and maintenance guides required for proper operation of the work tool.

Tool Mounted Operation and Maintenance Manual Holder

Cat® Smart Grader Blade attachments are for cutting, moving and grading dirt, gravel, sand and virtually any other material used as a base. The smart grader blade is an industry first bringing cross slope to D3 Skid Steer Loader and Compact Track Loader platforms.

Cat® Smart Grader Blade attachments are for cutting, moving and grading dirt, gravel, sand and virtually any other material used as a base.

Cat® Smart Grader Blade at Work

Cat® Smart Grader Blade with Assist

ConExpo Demonstration of Cat® Smart Grader Blade

Cat® Smart Grader Blader Operator Tips

Cat® Smart Grader Blade Features and Benefits

An Attachment for Every Job - Cat® Work Tool Attachments

exterior_spinset

360° View (HTML5)

Studio Shot

Front View

Top View

Left View

Rear View

Bottom View

Right View

Optional side wings allow the operator to make the blade wider and carry material similar to box blades.

Optional Side Wings

Cat® Smart Grader Blade attachments are for cutting, moving and grading dirt, gravel, sand and virtually any other material used as a base. The Smart grader blade is an industry first bringing cross slope to D3 Skid Steer Loader and Compact Track Loader platforms.

Products

Parts & Support

Technology

Company

Careers

Grader Blades

GB120 Grader Blade with Wings and Smart Technology

GB120 with Wings, Smart

GB120 Grader Blade

GB120, Smart

GB124 Grader Blade with Wings and Smart Technology

GB124 with Wings, Smart

GB124 Grader Blade

GB124, Smart

BUY A CAT 1-3T NEXT GEN MINI EXCAVATOR WITH A CAT B HAMMER.

Sign up to our newsletter

Products

Parts & Support

Technology

Company

Careers